Dim-out (All)

Filter by Price

Blind quick measure guide

Direct-curtain-blind-quick-measure-guide-v2
First, follow the orange lines to measure the window width and height.

Next, as a rule of thumb, add a 0.10m-0.15m (10-15cm) allowance to each side of the measurement. This will allow the blind to overlap the window and reduce light leakage from the sides.

For Illustration: Blind Width = Window Width + 0.10m + 0.10m

Blind Height (with beam) = Window Height + 0.10m

Blind Height (w/o beam) = Window Height + 0.10m + 0.10m 

In the above example, there is a beam right above the window. As the blind’s headrail will be mounted on the beam directly, there is no need to add 10cm to the top.

If there is no beam, the blinds will be mounted 10cm upwards from the top of the window frame.

Notes:  1 . The 10-15 cm (4-6 inches) allowance is a general guide, it can be more or less depending on individual’s preference. The more overlap you have, the lesser will be the ambient light leakage.

2. All blinds measurements are inclusive of the headrail & bottom bar. For roller/combi blinds, please note that the fabric width will be approximately 1.25~1.5 inches (3.2~3.8 cm) narrower than the headrail.

Example Picture for Point 2: Roller Blind Width Illustration-watermark

Curtain quick measure guide

Direct curtain - curtain quick measure guide

For curtain width, generally it will be from wall-to-wall. You can easily estimate the width from the floorplan.
 
For HDB beam-to-floor, the height is usually 2.1m to 2.23m approximately.
 
For HDB ceiling-to-floor, the height is usually 2.4m to 2.7m approximately.
 
For Illustration:
Curtain Width = Wall-to-Wall Width
 
Curtain Height (beam) = Beam to Floor Height
 
Curtain Height (ceiling) = Ceiling to Floor Height 
 
Notes:
1. As long as the required height is not more than 2.60-2.85m, it won’t affect the price. Generally, without joining fabrics, 100% blackout curtains can support till 2.45-2.65m height, and Dim-out curtains can support till 2.85m height. (This also depends on the type of fabrics.)
 
2. We only work with curtain tracks or rails. We do not carry curtains rods/poles regrettably.
 
P.S.
For curtain, normally it will be done from beam-to-floor to save some floor space.
 

Delivery + Installation Fee & Notes

1) Delivery plus installation starts at min. $80 for up to 5 indoor items. Additional indoor items are at $10 each. (For mainland Singapore only.)
 
2) Outdoor Roller Blinds start at $50 per item. Zip Blinds are at $80 per set.
 
3) Other items such as motors, exceptional tall ceilings & etc will require a custom estimate.
 
4) Delivery only (without installation), Self-collection and/or DIY installation can be arranged as desired to save on costs.
 
5) If the unit is not at lift level, stair-climbing charges are applicable. This is the same for within a Landed property, HDB Executive Maisonette, Condo Penthouse & similar.
 

Site Survey Fee & Notes

1) A nominal on-site consultation fee of $50 is payable upfront. It will be used as a CREDIT towards purchases of more than $480. (In the event of non-purchase, this fee is non-refundable due to time & labour spent.)

(If the site is not ready or if there is a change of mind after the first site visit, subsequent site surveys will be chargeable and are not reimbursable.)

2) The best time to do a site survey is after installation of the window grilles, carpentry around window, flooring, decking, aircon & trunking, electrical casing, curtain pelmet and etc are completed, as all these will affect the measurements. If the painting is also done, it is also easier to match the colours to your room walls.

3) During the site survey, we will bring along the popular fabrics samples. If you wish to view a wider range of fabrics, you can make an appointment to visit our showroom in Bedok.

4) For DIY measure, the site survey fee is not required. Do note that you have to be confident of your measurements, as alteration fees for “big to small” are applicable. “Small to big” alterations are impossible. Additional transport charges are required for re-delivery. We can also guide you to measure if desired.

5) In any case, we can give you a free estimate over your floorplan or measurements first, so you can decide if we are a good fit before committing to a site survey. :)

GREENGUARD Gold

Greenguard-gold-certified-fabric-direct-curtain

GREENGUARD Gold Certified fabrics reduces chemical emissions and minimizes the risk of chemical toxicity in indoor spaces.

This certification was developed by UL, which helps companies demonstrate commitment to healthier indoor environments. 

Read more about GREENGUARD certification here.

OEKO-TEX® STANDARD 100

Oeko-tex-certified-fabric-direct-curtain

OEKO-TEX® STANDARD 100 is a label for textiles tested for harmful substances and sets the benchmark for textile safety, from yarn to finished product.

Every item bearing the STANDARD 100 label is certified as having passed safety tests for the presence of harmful substances.

Read more about OEKO-TEX® Standard 100 certification here.

Types of Mechanism

1) Chain Pulley

This is the standard chain pulley system that allows you to raise or lower the blind smoothly with minimal effort.

Blackout Roller Blind Denim Blue Grey close-up

2) Cordless One Touch

This Cordless One Touch system let you lift up and down the blind easily without the use of a chain. It allows unlimited stopping positions.

Recommended for smaller and half-height windows.

– Min. Width is 0.8m;
– Max. Width is 2.3m,
– Max. Height is 3m;
– Max. Area is 40 sq ft.

Please adjust or split the blind into smaller sets as necessary.

3) Cordless Auto Spring

This Cordless Auto Spring system let you retract the blind easily without the use of a chain. You can stop the blind at any position while lowering the blind.

Recommended for smaller and half-height windows. 

– Min. Width is 0.8m;
– Max. Width is 2.3m,
– Max. Height is 3m;
– Max. Area is 40 sq ft.

Please adjust or split the blind into smaller sets as necessary.

Types of Headrail

1) Basic

The standard basic bare headrail system offers versatile installation options. The headrail can be mounted discreetly under a beam or ceiling, or rotated for wall mounting, provided there are no obstructions such as window handles or grilles.

This flexibility ensures seamless integration with your window design.

Blackout Roller Blind Denim Blue Grey close-up
headrail bare tube_blackout_blockout_indoor_roller_blind_porcelain_white

2) Classic Pelmet Cassette

The classic pelmet cassette elegantly conceals the exposed roller tube, while its front is beautifully wrapped in the same fabric as the blind itself.

This thoughtful design not only reduces light leakage from the top of the blind but also minimizes dust accumulation, ensuring your blind remains a stunning and functional addition to any room.

Note that the classic pelmet cassette is more bulky and requires a larger space for mounting.

Roller blinds with pelmet casing cassette - 213 Beige

Types of System Colours

The System refers to 3 parts:
– Headrail,
– Bottom bar, and
– Pull chain.

1) White System

This is the standard white system which is the default configuration for all roller blinds.

headrail bare tube_blackout_blockout_indoor_roller_blind_porcelain_white

2) Black System​

Here is an example of Black System. Suitable for dark-coloured blinds. You may request to change to black system for free, without any additional charges.

roller blind black system

Fabric Roll Direction

standard_inside_roll_versus_reverse_outside_roll

Types of Mechanism

1) Pull Cord

This is the standard chain pulley system that allows you to raise or lower the combi blind smoothly with minimal effort.

Korean Combi Blind – Blackout Oxford Black Brown Wood Look

2) Cordless One Touch

This Cordless One Touch system let you lift up and down the combi blind easily without the use of a chain. It allows unlimited stopping positions.

Recommended for smaller and half-height windows.

– Min. Width is 0.8m;
– Max. Width is 2.3m,
– Max. Height is 1.7m;
– Max. Area is 35 sq ft.

Please adjust or split the blind into smaller sets as necessary. 

Types of System Colours

The System refers to 3 parts:
– Pelmet Cassette,
– Bottom bar, and
– Pull cord.

1) White System

This is an example of the standard white system which is the default configuration for all combi blinds.

Korean Zebra Blind – Glitter Black Grey in Living Room

2) Black System​

Here is an example of Black System. Suitable for dark-coloured combi blinds. You may request to change to black system for free, without any additional charges.

Korean Rainbow Zebra Combi Blind – Blackout Echo Midnight Grey Study Room

Fabric Roll Direction

standard_inside_roll_versus_reverse_outside_roll

Standard Inside Roll

Here is an example of the default standard inside roll. You can observe that the fabrics are closer to the window.

Korean Combi Blind – Blackout Oxford Pavilion Grey Brown

Reverse Outside Roll

Here is an example of the reverse outside roll. You can observe that the fabrics are closer to the room.

Korean Combi Zebra Blind – Blackout Charcoal Black - night view